13813163536

[Component]

 

It is composed of transmission device, frame assembly, revolving body assembly, sealing device, feeding funnel, unloading funnel, exhaust hood at unloading, unloading curve rail assembly, horizontal rail device, feeding funnel, unloading funnel, exhaust hood at unloading, unloading curve rail assembly, horizontal rail;

 

[Supporting equipment]

 

Bulk carrier, plate feeder, double - layer ash discharge valve, etc.

 

【 Structural features 】

 

Sintering machine to unload the sinter cake after single tooth roller broken into the feeding funnel, through continuous evenly feed chute cloth on the rotary table and a rotary friction wheel drive car by driving devices, blower will bellows under cold air into the car at the same time, the cold air into hot sinter and compared with the heat, the hot sinter cooling. When the bellows are sent under the trolley, the cold air enters the hot sinter and conducts heat exchange with it, and the hot sinter gradually cools down. The cold sinter is sent to the finished belt conveyor by the plate feeder installed under the discharge chute. After the trolley unloading, it rises to reset along the curved rail and carries out the feeding process of the next cycle.